“ϵ҂

 |ݸкԣb޹˾

 ַ|ݸгƽ´ɳ﹤I^ɳ·

 ǰλã > 

,

ɫɫɫɫɫɫɫС˵,amateur,Ρι
lrg2019-10-21 Դrieter-perfojet.com

ҪaƷе񻨡׾T׾ܿھС_R,TbȮaƷKҿԽ܈Dӆ
|zy
1ϵyaƷṩӋJCęzyTߵęzy棬KЮaƷϸC
2MɲϰИI˜JGJI44-2004≦Ᵽع̼gҎ̣7.0.7lУպϸ񷽿Ͷ빤ʹá
3ϵy≦ӵ|պϸ᷽MУFʩlҎҪ
4,The lines should be firmly adhered to the base, without looseness or empty drums. The paste area between the polystyrene board and the base wall shall not be less than 40% of the area of the polystyrene board
5zճĨɰ{ÑʹÙCе裬,^ɲrgIJϲʹá

  • (11)
  • 6W񲼑NoܣпչġޡɫɫɫɫɫɫɫС˵,amateur,Ρι̡¶ȬF󣬷ʹLȑPҎ
    (7)Ĩɰ{cEPSlճYι̣oÓӺͿչĬF󣬟oػҺѿpȱݡ
    ʩ

    ̎----ճY--bl--λ--̶^--ӿp̎----
    1F
    ȌʩFMп飬zrҪƽ܌o@Ⱦ춲ҪĻ횸PMЅf{MޣKٴΙz_J
    2
    FyPߴ硣
    3D_J

  • (9)
  • FHrKYOӋDKijߴMд_J֮̎횼r޸ҊK͘IOӋ_J
    4aƷ
    EPSlaƷùSaS횸̈D,DQӹDŲԔĮaƷӹaӋ,KнYϬFHҪaMȡ춬Fķrrrmr{
    5
    ʩDڴbEPS IJλλо߅
    6l
    SaĮaƷ鶨LڬFbrMlҪеľlÌMСMƽƽ̎ɰĥ
    7 Fɰ{
    Ҽ ʩʹõɰ{ᘌEPS ҪƵČþۺճYɰ{
    ʩrֳʽ늄ӔC裬횳֡򣬳mС
    ɰ{{ꮅᣬo5 min ,ʹǰٴMД裬ƺõɫɫɫɫɫɫɫС˵,amateur,Ρι̑2Сrꡣ
    8ճN l

  • (28)
  • The polyphenylene EPS component binder USES high-quality composite bonding mortar, small lines are pasted with the method of full adhesion, large lines are pasted with the method of point circle bonding, the EPS component is pressed hard to completely fit the wall, the fullness is not less than 80% and the width of the bonding seam is not more than 3MM. Bond joints shall be pasted with hooks, with full mortar joints, and keep the surface of EPS components clean
    9b^

    lȡ500mmrھlbλKBo24СrᣬھlOλÛ_@ף׶^EPSl≦،ӣMӉwС50mm׶Ե춃ȿڣԷˮ뉦wϵy^ᔰbףɫɫɫɫɫɫɫС˵,amateur,Ρι̵ĈAPǶ뾀l棬¶
    10ӿp̎

    EPSl鶨LƷFƴӶɣǶLlƴӕróߴ磬ճNλ
    br횱Mʹӿp̎Nϡܷ⡣ճYBo24Сrᣬڽӿp̎TˢҼĨɰ{,SNҼӌ100mm͉AW񲼻oىTˢҼĨɰ{֡